Product Description

The introduction of screw conveyor

Screw Conveyor is a kind of continuous transmission equipment extensively used in the fields of the metallurgy, construction materials, chemical industry, food and the machinery processing.
Screw Conveyor has the advantages of sealed operation, simple structure.
Screw Conveyor suitable for conveying powdery, granular and small bulk materials horizontally or aslope, such as coal, ash, slag, cement, food, etc. screw conveyor is an new transportation equipment with power device,gear box,coupling,screw axis and hanging bearing.the screw axis is made of several sections which connected with spline.The conveyor hold large load capacity and convenient to dismounting. open a besel on the casing to ensure a safe operation.

 

Application
Screw Conveyor widely used in chemical, metallurgy, paper making, and construction industries. The equipment is mainly suitable for field flowing work, such as concrete mixing station, bulk material transit storage, etc. 

Features:

Material Handling Equipment Mining Coal Dust Auger Screw Conveyor for Sale

1.No pollution:

Flexible auger machine with totally-enclosed structure without causing any environmental pollution.

2.Widely application:

Construction available in mild steel and stainless steel so flexible auger machine can widely used for all kinds of material 

3.Easy to installed:

With simple structure so flexible auger machine easy assembly and replacement of component parts. 

4.Easy maintenance and low operating cost. 

5.Multiple inlets and outlets.

Flexible auger machine with multiple inlet and outlet,so it can mix material and unload material at any points

Technique Parameters of Pellet screw conveyor 
 

 

Model

Screw Dia.

(mm)

Screw Spacing(mm)

Rotational Speed(r/min)

Conveying Capacity(m³/h)

Conveying Distance(m)

LS200

200

200

50~90

7~12

2~15

LS250

250

200

45~90

10~20

2~20

LS300

300

200

40~80

15~30

2~20

LS400

400

300

35~70

25~55

2~25

LS500

500

400

35~65

45~90

2~25

FAQ:
Q:Installation

A: According to clients request, Jinrui machinery can provide installation Technicians to supervise and assist in the assembly and commissioning of the equipment.

Q: What about Warranty? what will we do if the machine is broken down  
A: The warranty period for all of Jinrui structural and mechanical equipment is normally 1 year. The warranty period for all electric motors is 6 months. Wear parts are not covered in warranty unless the component part is found to be flawed.

Q: What should we need to do for if we want to get a best quotation    
A: Hi, if you want to get the correct and exact selection of the model earlier ,please help us with following information

1).What is the material
2).the capacity (t/h )
3).feed size

 

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
splineshaft

Disc brake mounting interfaces that are splined

There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Best Sales Mining Coal Dust Auger Screw Conveyor for Sale     with Hot sellingChina Best Sales Mining Coal Dust Auger Screw Conveyor for Sale     with Hot selling